Blister Forming tray Type A

(Article No 07-132)

Blister-forming tray for prostetic sockets. Item with lateral bars for use in ovens with rails or with cradle Art.No. 07-134.

Dimensions LxW: 450 x 450 mm
inner diameter: D=360 mm

Cradle for Blister Forming tray Type A

(Article No 07-134)

This width adjustable cradle allows to use Blister-forming trays without legs (e.g. Art.No. 07-132) with Infrared-Ovens IR1001, 1301, IR1301 XTR or IR2101 DUAL.

Dimensions LxWxH: 400 x 300 x 250 mm / Width adjustable 300-550 mm

Blister Forming tray Type B (Set)

(Article No 07-132BS)

Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.

All components can be purchased separately as well.

Blister Forming tray Type B

(Article No 07-132B)

Blister-forming tray (solo), incl. two plates (D=320mm and D=265mm).

Teflon-coating, glass fibre-reinforced, for oven purpose etc.

Available as running meter in dimensions below:

Article No. 13-150
Surface porous, colour: beige
thickness: 0,20mm
running meter / 1500mm wide

Article No. 13-151
Surface even, colour: beige
thickness: 0,25mm
running meter / 1500mm wide

Replacement Teflon-coating sets for Infrared Ovens

Article No. 07-100-009/P
Teflon Replacement Kit for IR1000/1001, consists of
-Teflon coating porous, thickness 0,20mm, all 4 sides sewn weft

Article No. 07-130-009/P
Teflon Replacement Kit for IR1300/1301, consists of
-Teflon coating porous, thickness 0,20mm, all 4 sides sewn weft

Article No. 07-210-009/P
Teflon Replacement Kit for IR2101 DUAL, consists of
-Teflon coating porous, thickness 0,20mm, all 4 sides sewn weft

Aramid-Felt

(Article No. 13-200)

Aramid-felt 2,3mm thick, per running meter on a roll, width 1600mm,
heat resistant up to 250°C, color yellow

Suitable for covering and protecting teflon sheets when using Blister forming frames or Pre-Preg cradles etc..

Pre-Preg hose duct (option for IR-ovens)

(Article No. 07-135)

This option is available for all Infrared-ovens. It consists of a 3/4" duct (at the left side of the housing) which allows to put a vacuum-hose through to provide vacuum inside the oven. When not in use, the duct can be covered by an outside steel cap.

Inside diameter ~ 15mm

Pre-Preg Vakuum-Kit for PO and IR oven line

(Article-No. 02-882)

Kit Consist of:

A) 4-way Vacuum-Distributor Distributor with 4 heatresistant (200°C) stainless-steel vacuum-couplings incl. mounting bracket and connector hose with plug + couplingincl. 4x plug for Vacuum-coupling with hose nozzle D=4 + 4x hose nozzle D=6

B) Water trap 1/2" wit mounting bracket incl. hose nozzle D=10 (intake to distributor)incl. ball-valve with hose clamp D=12 (exhaust to vacuum-source)

 1-way Vacuum-tube set (e.g. for Pre-Preg processing)

(Article No. 07-137)

Vacuum-tube for Pre-Preg processing. The Set consists of vacuum-ube with plug and a heat resistant vacuum-hose (length = approx. 2 meter) with one heta resistant coupling. The vacuum-tube fits the cradle for Pre-Preg processing, Article No. 07-136

Outside tube diameter: 35 mm
Inside tube diameter: 28 mm
Tube length: 160mm
Silicone hose length: 200 cm

1-way Vacuum-tube set (e.g. for Pre-Preg processing)

(Article-No 18-500-308/S)

Vacuum-tube for Pre-Preg processing with bracket to hang the tube inside an oven. The set consists og the vacuum-tube with one ball-valve and a coupling, a bracket for hanging the tube (e.g. in an PO1200 oven) as well as a heat-resistant silicone-tube (length about 1m) with 2x plugs (fits vacuum-tube and Vacuum-Kit article 02-882 resp. the vacuum-distributor of the PO oven series)

2-way Vacuum-tube set (e.g. for Pre-Preg processing)

(Article-No 18-500-310/S)

Vacuum-tube for Pre-Preg processing with bracket to hang the tube inside an oven. The set consists og the vacuum-tube with two ball-valves and a coupling, a bracket for hanging the tube (e.g. in an PO1200 oven) as well as a heat-resistant silicone-tube (length about 1m) with 2x plugs (fits vacuum-tube and Vacuum-Kit article 02-882 resp. the vacuum-distributor of the PO oven series)

Cradle for Pre-Preg mold positioning

(Article No. 07-136)

This cradle allows the horizontal positioning of orthotic moulds inside Infrared-ovens when processing Pre-Preg or EASYPREG materials. The moulds are placed in the socket of the cradle by use of special vacuum-tubes. The moulds can be rotated by 360°.

Dimensions LxWxH: 560 x 210 x 190 mm
Inside diameter of socket fits vacuum-hoses
up to D=37mm

(suitable with Infrared-Ovens
IR1001, 1301, 1301 XTR, 2101 DUAL)

Water trap (separator)

(Article No. 02-881)

Water-trap 1/2“
incl. 6mm / 12mm hose connection

Special vacuum-hoses and fittings

Further we offer and host a large range of vacuum accessories like hoses (heat-reistant as well) fittings to realize the connection of vacuum-tubes and workplaces to a central vacuum-system or the like.

A choice of it you can find inside the brochure we offer for download.